Tubular Ultrafiltration System

Tubular Ultrafiltration System

Details
The membrane filters in tubular ultrafiltration systems have a gap of 0.03 microns, allowing only water and soluble substances to pass through while blocking any insoluble substances, effectively removing impurities from the water.
Category
UF System/NF System
Share to
Send Inquiry
Description
Technical Parameters
 

Tubular ultrafiltration system is suitable for separating biological sludge and producing high-quality water.

 

The membrane filters in tubular ultrafiltration systems have a gap of 0.03 microns, allowing only water and soluble substances to pass through while blocking any insoluble substances, effectively removing impurities from the water. The filtrate produced can be used for other purposes or sent to a reverse osmosis (RO) system for further filtration. Therefore, tubular ultrafiltration system can save more energy while operating at high efficiency.
product-1000-750

The tubular ultrafiltration system is made of high-strength materials. It is available in both standard and spiral configurations.

Tubular ultrafiltration systems utilize a cross-flow configuration. If the processing capacity of a single membrane element is insufficient, multiple elements can be connected in series to achieve greater processing capacity. This system uses 8mm or 5.2mm tubular ultrafiltration membranes and can handle fluids with solid content up to 40,000 mg/L.

We can help you select the ideal equipment for your specific application, and can customize the size, number of membranes, and other aspects of the tubular ultrafiltration system.

product-1000-750
The membrane elements used in tubular ultrafiltration system typically operates in a cross-flow configuration, allowing the media to be filtered to be pumped into the filter's tubing, thus keeping the ultrafiltration membrane clean and tidy. The tubular ultrafiltration system is highly resistant to sodium hypochlorite and can be cleaned with hydrochloric acid for easy maintenance.
product-605-286

 

Selection parameters of cross flow tube ultrafiltration system:

 

Membrane module model

FWT-6.4

FWT-15

FWT-27

FWT-33

FWT-36.7

FWT-40

Membrane area

6.4㎡

15㎡

27㎡

33㎡

36.7㎡

40㎡

Membrane module diameter

4 inches

6 inches

8 inches

8 inches

8 inches

10 inches

Membrane module length

3m

3m

3m

3m

4m

3m

Membrane tube diameter

8mm

8mm

8mm

5.2mm

8mm

8mm

Aperture

30nm

Flux

60-200l/㎡h

Transmembrane pressure difference

2-5bar

Operation mode

cross flow

 

 

Hot Tags: tubular ultrafiltration system, China tubular ultrafiltration system manufacturers, suppliers, factory, residential ultrafiltration systems, nanofiltration filter, uf filtration system, UF Membrane, industrial ultrafiltration, whole house ultrafiltration system

Send Inquiry
Contact us if have any question

You can either contact us via phone, email or online form below. Our specialist will contact you back shortly.

Contact now!